Upholstery Care
Flip over a sofa cushion or look under the seat deck of almost any upholstered chair, and you will usually find a small tag with a single letter or two: W, S, W/S or X. Most people never notice it until something spills. That little code is the most important piece of information you have before you touch a stain, because using the wrong kind of cleaner on the wrong fabric can leave a water ring, a faded patch or a stiff, rough spot that is much harder to fix than the original spill.
This guide explains what each upholstery cleaning code means, what you can safely do at home for each one, and when it is smarter to leave the job to a professional.
Manufacturers put the code in a few common places. Check these spots first:
The tag may say "Cleaning Code: S" or simply show the letter inside a box. Take a phone photo of it so you have it the next time something spills. If you cannot find any code at all, treat the piece as if it were the most delicate type until you know more. We cover that situation further down.
| Code | What it means | Safe home spot cleaning | Often found on |
|---|---|---|---|
| W | Water-based cleaners are safe | Mild, clear dish soap in cool water, used sparingly | Many polyester, olefin and nylon fabrics, some performance fabrics |
| S | Solvent-based cleaners only, no water | A water-free upholstery solvent, tested first | Rayon, viscose, many linens, some cottons, some velvets and microfibers |
| W/S (or SW) | Either water-based or solvent cleaners | Mild water-based method first, solvent if needed | Many blended fabrics and some microfibers |
| X | Vacuum or light brushing only | No liquids of any kind | Some natural-fiber, specialty and decorative fabrics |
The "often found on" column is a general pattern, not a rule. Two sofas made from fabric that looks the same can carry different codes, so always go by your own tag.
A W code means the fabric can handle water-based cleaning solutions. It is the most forgiving code and the one you are most likely to see on family sofas and sectionals built for daily use.
That does not mean you can soak it. Too much water can still travel into the cushion foam and the wooden frame, where it dries slowly and can leave a brown outline on the fabric surface or a musty smell. For a fresh spill on a W fabric:
An S code is the one that catches people out. These fabrics can shrink, lose color, or develop a water ring when they get wet. Rayon, viscose and many linen blends fall in this group, and some of them react badly to even a small amount of plain water.
If you have an S-coded sofa, keep water, club soda and all-purpose sprays away from it. For a small spot, use a water-free upholstery cleaning solvent made for this purpose, and follow these rules:
Many S-code stains, especially food, makeup and body oils on arms and headrests, are better handled professionally. A trained technician can work with low-moisture methods that clean the fabric without causing the water damage you are trying to avoid.
A W/S (sometimes printed SW) code gives you the most options. Water-based or solvent cleaners are both acceptable. In practice, start with the gentlest choice, which is usually the mild water-based method above, using as little moisture as possible. If that does not lift the stain, a solvent cleaner is the next step, again tested first.
Microfiber sofas often carry this code or an S code. Microfiber can look blotchy or stiff after a spill dries, which usually comes from leftover cleaner rather than the stain itself. A light brushing once it is fully dry often helps the texture recover.
An X code means no water and no solvent. The manufacturer is telling you that only vacuuming or light brushing is safe at home. This is the least common code, and it usually appears on delicate natural fibers or decorative weaves.
For X-coded furniture, vacuum regularly with a soft upholstery brush attachment and leave everything else to a professional. If something spills, blot gently with a dry cloth and call. Trying "just a little" water or cleaner on an X fabric is one of the most common ways people turn a small stain into a permanent one.
Older furniture, vintage pieces and secondhand finds often have no code at all, which is common in prewar apartments where a family sofa may have been reupholstered more than once. In that case:
The W, S, W/S and X system is for fabric. Leather and faux leather follow their own care rules and need their own products. Household upholstery cleaners, baby wipes and vinegar mixes can dry out real leather or strip its finish. For leather pieces, see our leather cleaning service and our guide to protecting leather furniture from dry winter heat.
Call for help rather than experimenting if the code is S or X, if the stain has already dried, if a home attempt left a ring or spread the stain, or if the spill involves pet urine, which soaks into the cushion foam and keeps smelling long after the surface looks clean. Our pet stain and odor removal treats the source, not just the surface.
A professional upholstery cleaning starts with reading the tag and testing the fabric, then matches the method to the code. Our team has been cleaning furniture since 2005, we are licensed and insured, and we use organic, kid- and pet-safe products. Most fabrics are dry to the touch within a few hours. The same care goes into our drapery and curtain cleaning, since many curtain fabrics carry the same codes.
We work in homes across Manhattan, Brooklyn and Queens, as well as Long Island and Westchester, with same-day appointments.
S means solvent cleaning only. Do not use water or water-based cleaners on it. Use a water-free upholstery solvent, test it on a hidden spot first, or have it cleaned professionally.
It is not recommended. Even a small amount of water can leave a ring or change the color on many S fabrics. Blot spills dry and use a solvent product or call a professional.
Yes, with care. X fabrics should not get water or solvent at home. A professional can inspect the fabric, use dry methods such as deep vacuuming and brushing, and tell you honestly if a stain cannot be treated safely.
Yes. Both mean the fabric can be cleaned with either water-based or solvent-based cleaners. Start with the gentlest method and test first.
Treat it as delicate. Blot and vacuum only, and have a professional test the fabric before any liquid cleaner is used.
Snap a photo of the tag and call or text (347) 594-1171. We are open 24/7 with same-day appointments, upfront pricing and a 100% satisfaction guarantee, and you get $20 off any service.
Same-day appointments across Manhattan, Brooklyn, Queens, Long Island and Westchester. Upfront pricing, no surprises, and $20 off any service.
Call or Text (347) 594-1171 →